PRO Acryl Spray - Matte Black Primer

PRO Acryl Spray — Matte Black Primer

PRO Acryl Spray in Matte Black is an aerosol primer developed in partnership with The Colour Forge for use on plastic, resin and metal models. Black priming keeps recesses dark from the first step and suits armoured infantry, vehicles and metallic-heavy schemes.

500ml per can — the biggest can in the category at this quality level, so it covers a full army rather than running out mid-project. Dries to a true matte finish that takes paint cleanly.

• Shake the can thoroughly for two minutes before use
• In cold conditions, warm the can to room temperature first
• Test on a spare surface to check the nozzle is spraying evenly
• Hold about 12 inches from the model and build up in short passes
• Invert the can and spray until clear afterwards to prevent nozzle blockage

• Pro Acryl PRIME Black brush-on primer, for touch-ups in the same tone
• Dark Silver and Rich Gold, which sit richer over black
• PRO Acryl Spray Clear Matte Varnish, to seal the finished model